Duracet 30 is relatively high molecular weight polyvinyl acetate adhesive

Duracet 30


DURACET 30 is a low viscosity polyvinyl acetate homopolymer with relatively high molecular weight. This homopolymer will experience minimal viscosity build when formulated with plasticizers or solvents. This gives the formulator wide latitude when selecting the types and amounts of plasticizers and solvents to be used, and still obtain a formulation that is easily machined.




Dry films of DURACET 30 are hard, with a glossy, translucent appearance. Plasticizer resistance is good. 

DURACET 30 may be thickened using high molecular weight polyvinyl alcohol solutions or conventional cellulosic thickeners. Solvent thickening is not particularly efficient, although solvents may be incorporated in order to enhance the specific adhesion by attacking a particular coating or film. Polar solvents, such as ketones, should be diluted prior to incorporation to prevent localized gel formation. DURACET 30 offers wide compatibility with a variety of conventional and proprietary plasticizers and will generally accept high plasticizer loadings without excessive loss of film tensile strength.

DURACET 30 conforms compositionally with FDA Regulation 175.105, 176.170, and 176.180.



Shelf Life: Six months at 70°F. Store in closed containers.

For additional questions, Franklin’s technical service team is available at 1.800.877.4583. 24/7 technical service is available online at www.franklinadhesivesandpolymers.com.

The recommendations and data contained in this Product Data Sheet for use of this product are based on information Franklin believes to be reliable. They are offered in good faith without guarantee, as conditions and methods of use of our product by Customer are beyond Franklin’s control. Customer must determine the suitability of the product for a particular application before adopting it on a commercial scale.
All orders for Franklin products shall be subject to Franklin International, Inc.’s Standard Terms and Conditions of Sale which may be found at
http://www.franklini.com/Terms_and_Conditions.aspx (“Standard Terms”). Different or additional terms proposed by Customer are expressly rejected and shall not become part of the agreement between Customer and Franklin International, Inc. with respect to any order. Contact Franklin International, Inc. immediately if you cannot access our Standard Terms and we will provide you a copy upon request. Any sale of products by Franklin to Customer is expressly conditional upon Customer’s consent to the Standard Terms, and Customer’s acceptance of any performance by, or receipt of products from, Franklin International, Inc. shall constitute Customer’s acceptance of the Standard Terms and Conditions of Sale.
©Copyright 2014. All rights reserved. Franklin International. Revised 07/31/14.